4 CH 15000ft Long Range Waterproof Remote Control Kit 30A Relay Output

Description

0020110
4 CH  15000ft Long Range Waterproof Remote Control Kit 30A Relay Output Feedback  Function
Model:  0020110
Package  Include:
1 x Receiver: S4PUW-DC06-ANT2 / S4PUW-DC09-ANT2 / S4PUW-DC12-ANT2 /  S4PUW-DC24-ANT2
1 x Transmitter: CC-4
1 x User manual
Feature:
Wireless control, easy to install.
Waterproof case with waterproof connectors.
High power, each relay output can work at maximum 30A current.
Super long range, with a transmitter to form a complete set, the working  distance can reach 5000m in an open ground.
Feedback function: can let the user know whether he/she had already connect the  transmitter and receiver successfully in such a long distance.
Two ways working mode, when the receiver gets the signal of transmitter, it will  immediately send a return signal to the transmitter.
America imported chips, which can ensure reliability and assure the high quality  of the products.
Relay output, can be used in home automation, such as security system, remote  control lights, motors, Doors / Locks / Windows / Blinds / Cars, and various  equipment.
It also can be used in agriculture and industry automation, such as long range  and high power remote control devices.
Wireless remote control products on land, water and air, especially in a long  distance, such as farm, pasture, offshore unmanned operation, field call, remote  security alarm, unmanned aerial vehicle, etc.
You can turn on/off the receiver with transmitter (remote control) from any  place within a reliable distance; the wireless RF signal can pass through walls,  floors and doors.
With characteristics of reverse power protection and over current protection
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use the  custom code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No. S4PUW-DC06-ANT2 / S4PUW-DC09-ANT2 / S4PUW-DC12-ANT2 / S4PUW-DC24-ANT2
Power Supply (Operating Voltage): DC6V (S4PUW-DC06-ANT2), DC9V±1V  (S4PUW-DC09-ANT2), DC12V±1V (S4PUW-DC12-ANT2), DC24V±2V (S4PUW-DC24-ANT2)
Working Frequency: 433.92MHz
Channel: 4CH
Control Modes: Toggle, Momentary, Latched
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Maximum Working Current of Relay: 30A
Static Current: ≤6mA
PCB size: 170mm x 109mm x 18mm
Case size:200mm x 120mm x 53mm
Work with custom code transmitters.
External Magnetic Sucker Antenna:
Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length:5m, we also can offer longer cable, such as10meters, 30meters.
Weight:55g
Anti-interference, waterproof, shielded wire set inside
Magnetic stand design for easy to install
Transmitter Parameters:
Model No.: 0021062 (CC-4)
Channel/Button: 4
Button Symbol: A, B, C, D
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
Working Current: 65mA (when the transmitter is transmitting the signal), 16mA(  when the transmitter is receiving the signal).
Standby Current: 5μA
Operating Frequency: 433.92 MHz
Encoding Type: custom code
Transmitting Distance: 5000m / 15000ft (theoretically)
The distance of 5000m is a theoretical data, it shall be operated in an open  ground, no barriers, no any interference. But in the practice, it will be  hindered by trees, walls or other constructions, and will be exposed to some  interference by other signals. Therefore, the actual distance may or may not  reach 5000m.
It has an on / off button on the side.
Modulation Mode: FSK+LORA
Feedback indication: buzzing sound
Operating Temperature: -10 ° C to +70 ° C
Unit Size: 135mm x 42mm x 25mm
Weight: 90g
Uses: Household control products, agricultural control products and industrial  control products. Wireless remote control products on land, water and air,  especially in a long distance, such as farm, pasture, offshore unmanned  operation, field call, remote security alarm.
Usage  (with the transmitter):
The receiver and transmitter can be used to control both DC0~28V and AC110~240V  equipments.
Notice: The receiver is relay output, not DC/AC power output. Initial state of  relay output terminals: Terminals A and B are Normally Open; Terminals A and C  are Normally Closed.
If you want to control a DC12V lamp, do as following:
1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power  adapter “-” to terminal “N / -“.
2) Connect Terminal A to the positive pole of the lamp, connect Terminal B to  the positive pole of the power supply, and connect both lamp and power supply’s  negative pole.
If you want to control an AC220V lamp, do as following:
1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power  adapter “-” to terminal “N / -“.
2) Connect Terminal A to one side of the lamp, connect Terminal B to the live  wire of the power supply, and connect lamp’s another side to power supply’s  neutral wire.
Setting different control modes (We have set the receiver as Toggle control mode  before delivery. If you want to use other control modes, do as following  operation):
1) Setting control mode Toggle (with transmitter CC-4): Turn on the first bit of  the dip switch.
Control mode Toggle: Press -> On; Press again -> Off.
Press button A of the transmitter: Turn on relay1 (connect A and B, disconnect A  and C)
Press button A again: Turn off relay 1 (disconnect A and B, connect A and C)
Press button B of the transmitter: Turn on relay2 (connect A and B, disconnect A  and C)
Press button B again: Turn off relay 2 (disconnect A and B, connect A and C)
Press button C of the transmitter: Turn on relay3 (connect A and B, disconnect A  and C)
Press button C again: Turn off relay 3 (disconnect A and B, connect A and C)
Press button D of the transmitter: Turn on relay 4(connect A and B, disconnect A  and C)
Press button D again: Turn off relay 4 (disconnect A and B, connect A and C)
2) Setting control mode Momentary (with transmitter CC-4): Turn on the first and  the second bits of the dip switch.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button A of the transmitter: Turn on relay 1 (connect A and B,  disconnect A and C)
Release button A: Turn off relay 1 (disconnect A and B, connect A and C)
Press and hold button B of the transmitter: Turn on relay 2 (connect A and B,  disconnect A and C)
Release button B: Turn off relay 2 (disconnect A and B, connect A and C)
Press and hold button C of the transmitter: Turn on relay 3 (connect A and B,  disconnect A and C)
Release button C: Turn off relay 3 (disconnect A and B, connect A and C)
Press and hold button D of the transmitter: Turn on relay 4 (connect A and B,  disconnect A and C)
Release button D: Turn off relay 4 (disconnect A and B, connect A and C)
3) Setting control mode Latched (with transmitter CC-4): Turn on the second bit  of the dip switch
Control mode Latched: Press -> On, other relays Off; Press another button ->  Off.
Such as:
Press button A: Turn on relay 1 (connect A and B, disconnect A and C)
Turn off other relays (disconnect A and B, connect A and C)
Press button B: Turn on relay 2 (connect A and B, disconnect A and C)
Turn off other relays (disconnect A and B, connect A and C)
Press button C: Turn on relay 3 (connect A and B, disconnect A and C)
Turn off other relays (disconnect A and B, connect A and C)
Press button D: Turn on relay 4 (connect A and B, disconnect A and C)
Turn off other relays (disconnect A and B, connect A and C)
Input  control terminals:
The receiver has four input control terminals, you can connect external devices,  sensors, or manual switches to these terminals to control the outputs of  receiver.
1) Signal input:
You can connect external devices (with low level output signal) to terminals  “COM”, “Signal 1”, “Signal 2”, “Signal 3”, “Signal 4”, the external device’s  output signal can control receiver’s four outputs.
When the external device outputs low level signal to terminal “COM” and “Signal  1“, Relay1 works.
When the external device outputs low level signal to terminal “COM” and “Signal  2“, Relay2 works.
When the external device outputs low level signal to terminal “COM” and “Signal  3“, Relay3 works.
When the external device outputs low level signal to terminal “COM” and “Signal  4“, Relay4 works.
2) The manual switches:
You can connect four manual switches to terminals “COM”, “Signal 1”, “Signal 2”,  “Signal 3”, “Signal 4”, then you can use these manual switches to control the  outputs of receiver.
When connect terminals “Signal 1” and “Com”, Relay1 works.. And when disconnect  “Signal 1” and “Com”, Relay1 stops outputting.
When connect terminals “Signal 2” and “Com”, Relay2 works. And when disconnect  “Signal 2” and “Com”, Realy2 stops outputting.
When connect terminals “Signal 3” and “Com”, Realy3 works. And when disconnect  “Signal 3” and “Com”, Realy3 stops outputting.
When connect terminals “Signal 4” and “Com”, Realy4 works. And when disconnect  “Signal 4” and “Com”, Realy4 stops outputting.
Notice:
The receiver can only pair two different model transmitters, model CC-4 (5000m),  CCW-4 (5000m, waterproof).
Setting feedback function:
If you want to have a feedback function: Turn on the third bit of the dip  switch.
When the receiver gets the signal of transmitter, it will immediately send a  return signal to the transmitter. When the transmitter receive the feedback  signal of the receiver, the transmitter will exude a buzzing sound like “D~”  which means it receive the feedback signal successfully.
How to pair the transmitter to the receiver:
1) Press button K1 of receiver for 1- 2 seconds; signal LED on the receiver is  on. The receiver enters into status of LEARNING.
2) Press any one button on remote control. If signal LED flashes twice, it means  learning is successful.
Delete all transmitters:
We have learned remote control to the receiver. If you don’t want the receiver  to work with the remote control, you can delete all codes of remote controls,  which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes three  times. That means all stored codes have been deleted successfully.