AC/DC12-48V 2-Channel RF Wireless Remote Control Switch with 4 Transmitter

Description

Document
Features
Accepts wide power input range 12-48V AC or DC that is available at many places
The wireless signal can pass through walls, floors and doors
You can turn on or turn off the receiver with transmitter(remote control) from any place within a reliable distance
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter
Widely Used: Home appliances switch, lighting switch, wireless control products, switches, intelligent switches and other electronic equipment
Specification
Working Voltage
AC/DC12-48V
Standby Curent
10mA
Working Current
30mA-90mA
Working Temperature
-20℃~80℃ / -4℉~176℉
Receive sensitivity
-103dBm
Frequency
433Mhz
Load Range
<10A
Code Type
Learning Code
Remote Control
Approx. 6.2 x 3 x 1.3cm/2.4 x 1.2 x 0.5 inch
Output Mode
Switch signal contact output
Working Mode
Self-locking, jog, interlock, delay
Weight
0.17kg
Operation Method
Press the Learning button once and the indicator flashes. Press the any one button on the transmitter, and the indicator flashes 3 times quickly. It indicates the code learning of the first relay is successful.
Press the learning button twice and the indicator flashes. Press the any one button on the transmitter, and the indicator flashes 3 times quickly. It indicates the code learning of the second relay is successful.
Clear Code: Press the "Learning" button until the indicator is long bright.
Working Mode
JOG: Press the "Model" button once, the indicator turns off after flashes one time, indicating the working mode is "JOG".
Interlock: Press the "Model" button twice, the indicator turns off after flashes two times, indicating the working mode is "Interlock".
Self-locking: Press the "Model" button thrice, the indicator turns off after flashes three times, indicating the working mode is "Self-locking".
Delay: Press the "Model" button four times, the indicator turns off after flashes four times, indicating the working mode is "Delay".(This mode will delay time for 5 seconds.)
Package
4 x Transmitter
1 x Receiver
Wiring