Evo X | ID1700x | Injector Dynamics | 1700.48.14.14.4

Description

Evo X | ID1700x | Injector Dynamics | 1700.48.14.14.4
Overview
ID1700, for Evo X. 14mm (grey) adapter top. Set of 4.
The ID1700 is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700 was designed to fill the gap between the ID1300 and the ID2000, and like the ID1300, it features corrosion resistant internals making it compatible with all known automotive fuels.
A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700 immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700 excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.
Application Notes
The ID1700 was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.
The ID1700 will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2000, should not be expected to do so on gasoline.
If you need flawless drivability on gasoline, the ID1300 will provide this, and is capable of approximately 150hp per injector on E85.
Basic Specifications
Length - 48mm, measured from o-ring to o-ring
Inlet o-ring - 14mm diameter
Outlet o-ring - 14mm diameter
Nominal Volumetric Flow Rate - 1725 cc/min at 3.0 bar using gasoline at 52 °C
Maximum Differential Fuel Pressure - 7.0 bar
Fuel Compatibility - Compatible with all known fuels
Electrical Connector - US Car
When ordering, please specify connector preference. You have the option to choose between:
Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (US Car) connector
Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Payment - Shipping - Returns
We Accept The Following Forms of Payment
For fast shipments, please pay for the item after purchase.  For Buyer/Seller protection, we will only ship to CONFIRMED addresses. Please, SERIOUS buyers only!
Shipping
PLEASE CONTACT US FOR PICK UP, FREIGHT & SHIPPING INFORMATION.  PLEASE CONTACT US BEFORE BUYING FOR INTERNATIONAL SHIPPING APPROVAL.
Returns
All sales are final. None of our items are returnable or refundable unless approved by Fischer Motorsports.
A Return Authorization may be issued in certain cases where Fischer Motorsports authorizes a return, refund or exchange. All returns and cancellations will be charged a 20% re-stocking fee. You must contact us via email and request for your case to be reviewed.
RA numbers expire 15 days after they are issued. Items returned without an RA number or using an expired RA number will be refused.
Please Visit Our eBay Store Or Contact Us For All Your MoTeC Needs
THANK YOU