Parallelogram Binocular Mount, adjusts to height of observer and stays on target

Description

Astronomical, parallelogram Binocular mount,
*
Now with convertible mount head
(for post or hinge mount)
for use with
your
Binoculars
(Mounted using the
1/4-20 screw mount in
the
binoculars
hinge, or post ),
adjusts to height of observer and stays on target!*
*
*if you viewer's eyes are at 45 inches (from the ground)
the PBM will adjust to them, and raise to 72 inches for taller persons
you may adjust your tripod for shorter persons... and
accommodate
a person 30 in taller
when
ordering... Please let me know the weight of your binos
look for other options in my other ads
( tripod not included)
The assembly attaches to standard 1/4"x 20  tripod screw
The 2 lb counter weight
(optional)
or the
supplied weight adapter*
on the CW arm adjusts to balance system.
*(uses your barbel weights)
See other ad for other weight options
*****
Heavier than 2 lb binoculars can be mounted by
adding more weight
as seen in last pic
The
CW should
equal the weight of the Bino's
We have used up to 15 lbs...
(pic 9,10,11...   included
unless you email a request for other option...
see below)
(note:
Your astronomical, parallelogram Binocular mount MAY
differ from the pictures shown here, as these are hand crafted.
)
Parts of the offered model are made with weather proof
DuPont™ Corian®‎
(variety of colors),
the
DuPont™ Corian®‎
comes in
(variety of colors)
,
however
the steel tubes and weights are red.
I can create a Custom unit... Tubes painted black add 15$ ,
Astronomical, parallelogram Binocular mount,
*
Now with convertible mount head
(for post or hinge mount)
for use with
your
Binoculars
(Mounted using the
1/4-20 screw mount in
the
binoculars
hinge, or post ),
adjusts to height of observer and stays on target!*
*
*if you viewer's eyes are at 45 inches (from the ground)
the PBM will adjust to them, and raise to 72 inches for taller persons
you may adjust your tripod for shorter persons... and
accommodate
a person 30 in taller
when
ordering... Please let me know the weight of your binos
look for other options in my other ads
( tripod not included)
The assembly attaches to standard 1/4"x 20  tripod screw
The 2 lb counter weight
(optional)
or the
supplied weight adapter*
on the CW arm adjusts to balance system.
*(uses your barbel weights)
See other ad for other weight options
*****
Heavier than 2 lb binoculars can be mounted by
adding more weight
as seen in last pic
The
CW should
equal the weight of the Bino's
We have used up to 15 lbs...
(pic 9,10,11...   included
unless you email a request for other option...
see below)
(note:
Your astronomical, parallelogram Binocular mount MAY
differ from the pictures shown here, as these are hand crafted.
)
Parts of the offered model are made with weather proof
DuPont™ Corian®‎
(variety of colors),
the
DuPont™ Corian®‎
comes in
(variety of colors)
,
however
the steel tubes and weights are red.
I can create a Custom unit... Tubes painted black add 15$ ,
Corian®‎
painted black add 25$ , or all painted black only 35$ more
===========
What others have said
==========
Works well w/ my big astro-binos! Thx.
Item as described and it works great - Stays where you put it. Thank You!
Just as ordered fast delivery perfect seller, thank you
put my 15x70 skymaster on it added little more weight works great thanks.
Good seller, high quality, why pay more for less? It works like a champ!
==================
This mount can support (and has supported) Celestron 20x80 binoculars With just a added weight
The tubes are steel
and the pivots are nylon and as stated above, the main housing is 1/2" Corian
(counter top material)
==========================================================
option
Are your
binoculars are heavier than 2 lbs? Unit is shipped with the
weight adapter.
as seen in pic 9&10
..
It allows you to use
your
barbell weights for the CW
(shaft measures 7/8 in.)
as seen in pic 11
You can opt for the 2 lb lead weight shown...
Your choice.
or mount your weight
(drill 1/4" hole in your weight and mount on CW
1/4x20  6"bolt )
as seen in pic 12
I can provide weights, priced at (+shipping
per pound)
(USPS priority mail flat rate box)
(center drilled as above, formed in a tuna can and painted to match )
email request
...each can is abt 4.5 lbs
-and-services/construction-materials/surface-design-materials/brands/corian-solid-surfaces.ht ml?src=corean_g_Exact" target="_blank" style="text-decoration-line: none; color: rgb(0, 150, 239); cursor: pointer; line-height: 18px;">Corian®‎
painted black add 25$ , or all painted black only 35$ more
===========
What others have said
==========
Works well w/ my big astro-binos! Thx.
Item as described and it works great - Stays where you put it. Thank You!
Just as ordered fast delivery perfect seller, thank you
put my 15x70 skymaster on it added little more weight works great thanks.
Good seller, high quality, why pay more for less? It works like a champ!
==================
This mount can support (and has supported) Celestron 20x80 binoculars With just a added weight
The tubes are steel
and the pivots are nylon and as stated above, the main housing is 1/2" Corian
(counter top material)
==========================================================
option
Are your
binoculars are heavier than 2 lbs? Unit is shipped with the
weight adapter.
as seen in pic 9&10
..
It allows you to use
your
barbell weights for the CW
(shaft measures 7/8 in.)
as seen in pic 11
You can opt for the 2 lb lead weight shown...
Your choice.
or mount your weight
(drill 1/4" hole in your weight and mount on CW
1/4x20  6"bolt )
as seen in pic 12
I can provide weights, priced at (+shipping
per pound)
(USPS priority mail flat rate box)
(center drilled as above, formed in a tuna can and painted to match )
email request
...each can is abt 4.5 lbs