Red Dot Finder Scope StarFinder & Finderscope Dovetail Slot for Astro Telescopes

Description

Main Features
:
Simple, affordable, and effective red dot sighting device makes aiming your telescope
Very easy to adjust. Thumbwheels allow positioning of the red dot horizontally and vertically for precise telescope alignment
An adjustable small red LED dot is projected onto a non-magnifying viewing window so you can aim the main telescope quickly and easily
Includes Mount Bracket
Material: Plastic + Metal
Color: Black
Net Weight: 70.0g/2.47oz
Note: This Red Dot Finder Scope for CELESTRON 80EQ 80DX 90DX SE SLT OMNI Series and so on Astronomical Telescopes
Dovetail Base is not included.
How to use a red dot finder:
First of all pull out the clear plastic sheet that is at the front and on the bottom - you can see this in one of the photos. This allows the battery to make contact so that the red dot appears when you switch it on.
Next, try the finder by switching it on with the small rotary control on the side. Look through the hole at the front of the finder and you should see the red dot and be able to make it brighter or dimmer by using that rotary control which is also the on/off switch.
Now set your scope up as normal but put the red dot finder on instead of the usual optical finder.
Point your telescope to something like a TV aerial or a chimney - anything about that size will do, and the further away the better. Looking through a low power eyepiece (25mm is ideal) find the object by adjusting your telescope and focus the object. Adjust the mount using the slow motion controls so that the object is right in the center of the view.
Adjust the finder so that the red dot is exactly on the object you were looking at. You can adjust it by using the two larger wheels. The one on the right at the front does the left/right direction and the one at the back on the bottom does the up and down.
Switch it off and wait until dark
You now use it by switching the finder on, then looking through the finder so that the red dot lines up on to the target you are going to observe through your telescope. Once the red dot is exactly over the star or planet it should be exactly in the center of your eyepiece view.
Remember to switch it off once you have found your target to save the battery.
New Multi-Function Finderscope Dovetail Slots For Optical Telescopes Finderscope
Features:
Solid all metal construction ultra-thin design, ultra-light weight
It can be installed to: Celestron C8, C8HD, C925, C11HD, SKYRVER: 80ED, 102ED, 130APO, SKYRVER 100ED binoculars, and other primary mirror, can be fitted to the sharpstar, Celestron another model
Length: along the 34mm
Width of internal slot: 5.1mm
Horizontal length of internal slot: 37mm
Vertical length of internal slot: 35.5mm
Color: Black
Weight: 41g
Can be fixed: M3-M5 screw
Package Includes
Red Dot Finder Scope
CR2032 Button Battery
Black Finderscope Dovetail Slots
2 x Screw