Security control panel FLEXi SP3 WiFi and 4G 2G or Ethernet connectivity TRIKDIS

Description

FLEXi
is a hybrid security control panel with on-board
WiFi
and
4G
,
2G
or
Ethernet
connectivity. The unique feature set allows you to use this panel both in intrusion alarm and automation installations.
Short description
Security control panel FLEXi SP3 WiFi and 4G 2G or Ethernet connectivity TRIKDIS
Model
SP3
Specifications
Reporting to the security company‘s central monitoring station (CMS):
Event reporting either via the built-in WiFi module or cellular 2G/4G modem.
Additional modules to send reports via Ethernet or VHF/UHF radio waves with chosen priority.
Any CMS can receive reports, as long as they have TRIKDIS software/IP receiver or any other manufacturer’s IP receiver supporting SIA DC-09 IP protocol.
Design based on two decades of experience in transmitting reports to main and backup central monitoring station receivers, which allows security companies to provide the highest level of protection to premises
A setting for necessity to send to CMS, to mandatorily send reports to CMS first, and only then to customers.
Possibility to send event reports to CMS of two different security companies.
Multitude number of message transmission channels and multiple transmission priority settings.
Reporting to user:
Via
Protegus
mobile app, which gives warnings about alarm system events using push and special sound notifications.
Event reporting via SMS messages to 8 cellular numbers.
Reporting about events using pre-recorded voice notifications (up to 8 cellular numbers).
Remote control of selected premises’ protection mode (Arm/Disarm/Stay/Sleep).
Remote control of connected devices (lighting system, automatic gates, ventilation, heating, watering systems, etc.).
Remote temperature measuring.
Inputs and outputs:
10 I/O terminals, each one can be set as an input (IN) or output (OUT). Input (IN) types: ATZ, EOL, NC, NO. Different parameters of resistors can be used in EOL and ATZ type circuits. The number of inputs IN can be expanded to 32 by using keypads, iO-8 and iO-WL expander modules.
The board has 2 dedicated outputs: the bell and the LED. The bell is to control the siren, and the LED is to control indicator lights. The number of outputs can be expanded to 16 by using iO-8 and iO-WL expander modules.
Seven output operational settings. Each output can be assigned with an operational logic, a preset operation schedule or qualities, for example, thermostat mode.
One-wire data bus (“1-Wire”) is designated to connect temperature sensors (up to 8), a temperature and humidity sensor (1) or a key fob (“iButton”) reader.
The GRN-YEL data bus is designated to connect 8 keypads of the same type.
The RS485 data bus connects
iO
series expander modules:
RF-SH
radio wave wireless sensor transceiver,
E485
Ethernet module,
T16
VHF or UHF radio wave transmitter.
Control of alarm system
4-digit long control codes (40 in total), which may be used as a coercion code as well. In such scenario, entering the user code will disarm the alarm, yet a special report will be sent to the CMS indicating that the alarm was disarmed as a result of coercion.
Control using keypads: SK232LED, Paradox K636, K10H(V) K32+LED, K32LED, K35, Crow keypad CR16, CR-LCD, CZ-Dallas electronic (“iButton”) key reader, TM17 electronic key reader, RFID reader (Wiegand 26/34).
Remote control via
Protegus
mobile app, phone call or SMS.
Simple installation:
Multiple sizes of
SP3
mounting kits that include a decorative white metal housing with a built-in step-down transformer or impulse power supply.
Default
SP3
operational settings are based on many years of experience. That allows to install the system in 7 out of 10 small and medium-sized premises without the need to change the default settings.
The
SP3
control panel allows to replace the previous panel without changing the resistors in each wired sensor.
Settings can be saved as a file to be used later.
Device configuration via USB cable or remotely by using
TrikdisConfig
Remote connection via
TrikdisConfig
software allows not only altering
SP3
parameters but monitoring the operation of the panel as well.
Two access levels for parameter settings: installer and administrator.
Shipping / Delivery Terms
cable packed in a paper box shipped via registered package with tracking number provided by Lithuanian Post
Free (Worldwide Economy, registered Post)  2-3 weeks
Standart DHL (Europe only) - 1 week
DHL Express (Worldwide expedited)  1 - 3 days
Contact us
We have always been doing our best to provide the best service and reliable products for our customer.
Customers are responsible to check product compatibility issue. If you have questions about product please feel free to contact us.
Payment Terms
We accept PayPal only.
Shipping Terms
Items will be Shipped on the Same or Next Business day after the payment was cleared. Tracking information will be sent to you later upon package shipped via email.
We only ship to the shipping address that provided by Paypal. Please make sure your shipping address is correct and current. We are not responsible for any package lost due to wrong or undeliverable addresses.
Feedback
Our positive
feedback
will be left immediately after receiving payment. Please leave us positive feedback upon satisfactory receipt of the item. We are appreciate it.
Please email us before leaving negative feedback. Give us the opportunity to resolve a problem. We will try our best to resolve the issues.