SkyWatcher SynScan USB PC Interface Cable 7m for SkyWatcher SynScan mounts

Description

SkyWatcher SynScan USB PC interface cable
designed to control your computerized telescope from a laptop or PC through the various planetarium programs. It connects to the USB port of the computer and to the RJ9 port of the hand controller.
SkyWatcher SynScan USB PC interface cable is also can be used to update the firmware of the hand controller. Unlike the proprietary SkyWatcher SynScan RS232 cable, SkyWatcher SynScan USB PC interface cable does not require the Serial-to-USB adapter.
Optionally, instead of this cable, you can use wireless adapters –
ScanFi
https://www.ebay.com/itm/312647727029
or
ScanBt
https://www.ebay.com/itm/312665393097
To use the adapter, you need to first install SkyWatcher SynScan USB PC interface cable driver.
Description
:
SkyWatcher SynScan USB PC Interface Cable is used to connect a laptop or computer to a computerized SkyWatcher SynScan  telescope via a port in a hand controller. The USB connector is connected to the USB port of your computer. The other end of the cable ends with a plug with a connector for the phone jack and just snaps into the port on a hand controller designed for this purpose.
After you have connected your computer and telescope, you can update the firmware of the manual control. The latest updates can be found in the support section on the SkyWatcher website.
Connecting a computer to your telescope will also allow you to move the telescope from different planetarium programs! Today, there are many programs available that not only display the night sky, as it appears on any chosen observation night, but this will allow you to send your telescope to any object on the screen at the touch of a button.
Characteristics:
Compatibility: Windows XP / Vista / 7 / 8 / 10 (x64 / x86)
Cable length: 7 meters
You can also buy such cable by the length of 3 meters
https://www.ebay.com/itm/313268615362
In order to improve the quality of the product, the manufacturer reserves the right to make changes to the design and equipment without notifying users.