Wireless DC12V 4-Channel Remote Control Receiver Switch with Transmitters

Description

Document
Features
Transmitting Frequency: 433MHZ
Small volume, stable performance, high receiving sensitivity.
Compatible with 2262/2260/1572/2240 chips etc, it enables to work with most remote transmitter(remote control).
Good Wireless RF Signal, it can pass through walls, floors and doors, control receiver from any place within a reliable distance.
Apply for electrical control equipment such as anti-theft alarm, remote control electric door and window, signal control, industrial control, lifting equipment.
Specification
Encode
Intelligent learning
Channel
4-channel
Working Mode
jog, self-locking, inter-locking
Working Voltage
DC12V
Static Operating Current
≤6mA
Working Temperature
-40℃~+80℃(-40℉~+176℉)
Receiving Sensitivity
≥-105dBm
Operating Frequency
433Mhz
Output Current
≤10A
Key
4 key
Transmitter Color
Black
Receiver Board
68mm×48mm×16mm/26.77"×18.90"×6.30"
Including Shell
72mm×53mm×26mm/28.35"×2.0.87"×10.24"
Pairing Method
Connect power, press the learning key on receiver for one second, indicator on receiver becomes being on. Then immediately press the key you want to learn on remote control. After that, the indicator on receiver will flash several times then become off automatically, at this time pairing transmitter and receiver is complete.
Clear Code
Connect power, long press learning key on receiver for about 8 seconds until the led light on receiver flashes continuously, then release. At this time, code clearance is complete.
Note
The receiver can learn fixed code(PT2262,SC2260 chips etc.)/learning code(EV1527,HS2240 etc) total 20 code. If codes of any key of remote exceed 20, the receiver will clear the code of the earliest learning in turn.
Attention
When switching working mode, please must clear code before learn code .
Package
1 × Receiver
2 ×Transmitters
1 x English Manual